SiteMapEPC2TC32NICS1494M74HCT157NC8051F321ADTSP-2183BST-133SN74ACT32DMAX9152EUEOPA4237UAMX7538KCWGMAX3089EESD Quick Search: 304 GRM TL8 FTS TXC M95 SV1 TA2 MN3 TCE RL5 FDA 724 TYN
Position:Home » DataSheet » TDA Page No. 11 » TDA4862G Suppliers

TDA4862G datasheet pdf datenblatt

TDA4862G SuppliersTDA4862G PriceRelated PDF DownLoad

Ic TDA4862G

Nidec new listing of the torque meter Bao "TNX" series and IC TDA4862G and with data management test bed "DSP-10" a combination of electric torque tester. By combining the two devices, can be more accurate automatic torque test. Price of 1,971,900 yen (tax included). TNX range of products including test range 0 ~ ± 2N · ms "TNX-2", test the range of 0 ~ ± 5N · ms "TNX-5" and test the range of 0 ~ ± 10N · ms "TNX- 10 "three. Have to open the valve mode, close the valve model and average model. Open the valve model can be extracted in the 3-point peak, the memory can be saved to open the valve and close the valve of the 1000 data, the data can be removed with the U disk. The test bed "DSP-10" aspects of the enhanced data management capabilities. Measurement data can be read on the computer to graphically display the relationship between torque and angle. After combining the two devices accuracy ± 0.5% F.S.. In the test operation, in addition to testing the torque, but also the point of testing, destructive testing and sample testing. The included software can be used to set test speed and angle of rotation. Rotation speed range 0.1 ~ 25.0rpm. Measuring the angle range of 0 ~ 1440 °, 0.1 ° can be set according to each. From the mobile lift shaft up to 400mm, speed is 10 ~ 600mm / min.

TDA4862G Suppliers

Currently, Samsung SDI is The only production of AM-OLED mobile phone manufacturers. Taiwans Chi Mei Optoelectronics (CMO) subsidiary CMEL (CMEL) is the only mass production of AM-OLED, another vendor, but the product has not yet used any of a terminal product.

TDA4862G Price

in general lighting applications, as different applications require different power LED driving solution. If the low-power applications, can be used with ON Semiconductors NCL30000 off-line power factor correction LED driver, compatible with TRIAC dimmer. This drive direct drive LED, and TDA4862G Price and with a constant current output steady flow close; power factor higher than 0.9, in line with IEC C standard harmonic content category, out of the "Energy Star" specifications; in the low 5 Zhi 15 W output power level, the energy efficiency above 80%, higher than the typical 83% efficiency, is ideal for this type of general lighting applications. Street lighting in high-power applications, can be used ON Semiconductor NCP1397 NCP1607 PFC controller, resonant half-bridge controller that increases the overall style programs, energy efficiency up to 92% -93%, and reduce electromagnetic interference.

All rights © 2010-2016