SiteMapAT24C64RB501V-40MAX1687EUEHIP6017CBBF820DS1013S-40MC1488DR2GIRFP9140NPBFLA7841OPA4348AID Quick Search: 304 GRM TL8 FTS TXC M95 SV1 TA2 MN3 TCE RL5 FDA 724 TYN
Position:Home » DataSheet » TPA Page No. 3 » TPA2005D1ZQYR Suppliers

TPA2005D1ZQYR datasheet pdf datenblatt

TPA2005D1ZQYR SuppliersTPA2005D1ZQYR PriceRelated PDF DownLoad

Ic TPA2005D1ZQYR

He believes that, in the process of industrial automation, one million kilowatts this year to pay attention to ultra-supercritical thermal power unit control system is put into operation successfully , 8 million to 10 million tons oil refining unit control system and IC TPA2005D1ZQYR and control system for a large ethylene project could break through. "As far as I know, there are at least two companies have separately begun delivery ."

TPA2005D1ZQYR Suppliers

CPCI-6510 can support 8G dual-channel DDR3-1066SDRAM (welding by the ECC), and TPA2005D1ZQYR Suppliers and use MobileIntelQM57 platform controller hub. After careful parts selection, cPCI-6510 can choose to support the -40 ° C to 80 ° C temperature range. Since all parts are soldered to a board, it can be very wide field of applications such as military and communications.

TPA2005D1ZQYR Price

1. NMOS-NMOS synchronous buck converter operating frequency to 300kHz, can provide more than 95% efficiency. 2. 30ns minimum dead time and TPA2005D1ZQYR Price and drive 99.5% of the maximum effective duty cycle. 3. Precision voltage and current regulation: ± 0.5% charge voltage accuracy; ± 3% Charge Current Accuracy; ± 3% Adapter Current Accuracy; ± 2% accuracy of input current sense amplifier. 4. Highly integrated: the AC / DC adapter or battery power between the system automatically selects; internal loop compensation; internal soft start. 5. Security; programmable input overvoltage protection (OVP); with a status indicator of the dynamic power management (DPM); Programmable Inrush Adapter Power (ACOP) and Overcurrent (ACOC) restrictions; anti-wizard through the input protection FET. 6. To support two, three or four lithium batteries. 7. AC / DC adapter operating range: 5 ~ 24V. 8. With analog inputs, through resistor or DAC / GPIO Host Control functions to achieve the proportion of programming: charge voltage (4 ~ 4.512V / section); charging current (up to 10A, and has a 10m sense resistor); adapter current limit (DPM). 9. State and monitor output: a programmable threshold voltage AC / DC adapter; derived from the input supply current. 10. Battery memory cycle control. 11. Supports a variety of battery chemical composition: Lithium, nickel cadmium, nickel metal hydride, lead acid and electricity. 12. Charging enabled. 13. 28-pin 5 × 5mm QFN package. 14. Low Iq value of the Energy Star standards: <10-μA off the battery discharge current; <1.5-mA quiescent current shutdown state input.

All rights reserved:IcFull.com © 2010-2016